Archive for the ‘Home Appliance’ Category

Tips on Keeping Your Dishwasher Healthy

Nothing beats the convenience of a dishwasher when it comes to keeping your kitchen running smoothly. There are several easy practices you can do to keep your dishwasher happy and healthy too. Whether you’re sticking with your current dishwasher or planning on a new dishwasher installation in Gaithersburg, MD, try adding the following items to your routine.

Exercise it Regularly

Today’s dishwashers feature everything from intelligent soil sensors to germ-sanitizing settings to more efficient use of water (and hence more savings on your water bills). And like anything else with a lot of moving parts, one of the best things you can do to keep your dishwasher running is to use it regularly. Running your dishwasher daily or at least every other day will prevent residue build-up in the dishwasher interior as well as in the drain.

Avoid Junk Food

More seriously, avoid feeding your dishwasher any food, whether its junk food or wholesome. Even if you’re feeding your dishwasher plates with remnants of uneaten kale and Swiss chard, you’re likely filling your dishwasher with contents that may eventually have a negative impact on its performance. The bottom line is: Remove chunks of food from your dishes before putting them in the dishwasher. You don’t need to pre-wash the dishes; just wipe any food chunks into the trash beforehand.

Practice Good Hygiene

And finally, the dishwasher itself will benefit from being washed occasionally. In addition to cleaning the drain trap regularly, be sure to give the dishwasher’s interior a good wiping with an all-purpose cleaner or a mix of vinegar and water.

These are just a few of the practices that will keep your dishwasher running smoothly for years to come. Check your dishwasher’s user manual for other ideas. For new and old dishwashers alike, doing these practices regularly will go a long way toward keeping the repair person away.

Things To Examine On Your Furnace

Life in Conroe, TX is typically warmer than many other parts of the country. Even so, there are times of the year that residents who live there may want to turn up the heat. Though it may not be used often, it’s good to keep the furnace in your home in great working order so that it’s always available when you need it. If it ever truly needs breaks down, then fixing it yourself should never be an option. It is better to find heating repair Conroe TX. That being said, there are some furnace maintenance duties that you can carry out yourself.

Check The Flame

When it is working properly, the pilot flame of a heater should be even and blue. Anything other than this represents an issue of some kind. Yellow flames, for instance, is an indicator that the burners are dirty. If there is an issue of any kind, don’t attempt to correct it yourself. Contact a heating professional.

Change The Filter

As you should throughout your house, you should inspect the filter of the furnace regularly and change it if it need be. Typically, this should occur every three months. Inexpensive filters work best. Higher quality filters have a tendency to restrict air flow making the furnace less efficient not more.

Check For Worn Belts

Another maintenance task that you can undertake is the inspection of belts on furnaces that utilize belt driven blowers. Signs of cracks and frayed areas indicate that the belt should be changed sooner rather than later. Replacement belts are fairly inexpensive and not too difficult to change.

Being cold is never a pleasant feeling, so it’s good to be able to crank up the furnace when the temperature drops. Keeping your furnace maintained means never having to worry when you need it to work. There are plenty of things that you can do yourself, but any major repairs or alterations should be left to the professionals. In the meantime, stay proactive and warm.

The Tools That Every HVAC Professional Needs

While it may obvious that an HVAC professional repairman will need to lug around a toolbox filled with such things as wrenches and screwdrivers, there are quite a few other tools that are quite specific to the career of an HVAC repairman. This article will take a look at the hvac specialty tools every pro will need!

1. Hoses and gauges fitted for 410. These are a definite must-have in the toolbox. The reason why is because the pressure which 410A deals with is much higher than that of R-22. Some old-timers will argue that some will fit others and that they can be cross-used and this is technically true but the new way of teaching and learning is to use the specific fitting for the specific oils, that way nothing can be cross-contaminated or accidentally blended together.

2. HVAC torches are also another must as they are really the only way to work with the copper tubing that is prevalent in HVAC units. They can be pricey as an initial investment but as the old saying goes, “you have to spend money to make money.”

2. Some other more modestly-priced but no less important tools that fall under the umbrella of must have are fin straighteners fo the coils of both the evaporator and the condenser coils, a 5-in-1 screwdriver which will be much more convenient than having to deal with 5 different screwdrivers, and a detector which can locate refrigerant leaks. While soapy water can also be used to look for leaks, it looks so much more professional to use actual factory-made tools versus doing things in a jimmy-rigged hodge-podge fashion.

There you have it! All of the tools that an HVAC professional will need, at least for now. All the best!

Is Your Refrigerator In Need of Repair?

A refrigerator is one of the most important appliances in a household. It keeps foods from spoiling and helps maintain fresh foods for long periods of time. Having a faulty operating, or non-working refrigerator can put a crimp in how the house runs. Below are a few o the signs that your refrigerator might be in need of service.

Condenser Noises and Vibration
The condenser is located at the bottom of the refrigerator and can only be accessed through the back of the appliance. If you are hearing loud noises, humming or vibrations from this area, it is time to contact a repair technician for a repair. Do not attempt to change this part unless you are experienced. There is a lot of electricity that runs through a refrigerator and touching the wrong thing can cause electrocution injury.

Wild Temperature Fluctuations
If you experience items freezing one day in the bottom of the fridge and feeling warm the next, there is a problem going on that needs serious repair. There may be a bad thermostat that needs replaced. A bad thermostat is usually the culprit if you turn the cold adjustment and it makes no difference in the cold imbalance.

Ice Build-up in a Frost-Free Refrigerator
Contemporary frost-free refrigerators are designed to keep foods frozen or cold without the need to defrost the freezer every few weeks. This was a chore that used to be the bane of every house wife. A good indication that your refrigerator might need service is finding chunks of ice in the freezer, or lower compartments that melt into pools of water. This water will eventually end up all over the kitchen floor.

The Refrigerator Quits Working
There is no longer any doubt that a repair needs to be made if the refrigerator quits working altogether. Make sure that the appliance has not inadvertently come unplugged, or that a breaker has not tripped causing the appliance to not have electrical access. A non-working fridge does not necessarily mean you will have to get a new one. There are many times the problems are fixable and can avoid paying a fortune for a new appliance.

Contact your local Sub Zero repair service like Sub Zero Repair Centers and make an appointment for an expert technician to repair your fridge right away!

Install solar panels for your house without facing any difficulties

residential-solar-panelsNowadays solar panel has become very much popular among the people all over the world. Talking about solar panel, first, you should know about the solar energy which is also called as a renewable energy source. Solar energy is received from the sun and then it gets converted into an energy source by some mechanical process for home use. As the sun is readily available during the daytime, solar energy is very much reliable and cheaper to use. The mechanical purpose of a solar panel is to convert the solar energy into electricity. In the earlier days, installation of the solar panel was costly, but since last 20 years, the rate has dropped effectively and now it has become very much affordable.

Now if you are planning for the installation of solar panels in your house, then you should always prefer for the best consultant who can give you several benefits. One the best consultant in this field is the Abundant Solar and by installing abundant solar residential solar panels you can take advantage of your tax breaks like thirty percent IRS credit. Not only that, you can also avail local rebates for this type of panels. By installing a solar panel you can actually reduce the electricity bill or can eliminate it forever. Solar panels will add equity to your house by providing clear energy. You need not worry about these panels as Abundant Solar offers turnkey provision which includes solar panel installation, warranty, and financing issues. You can know more about this by visiting their website or by calling any of their representatives.

One must do the installation process carefully as there as several steps to be completed. First of all the company’s representative will visit your house and do the necessary analysis. This will help the company to determine the best possible way of installing the solar panels which will benefit you by providing maximum energy. Next, it offers different financing option and most of their lenders offer low-interest rate, no money down and a penalty for early payout. After that, once again the representative will visit your house to take the measurement of your house in order to decide the size and shape of solar panels. It is also important for engineering drawings and other permits. Once all these are done, a drawing will be submitted to the utility company and HOA and after these two approve the drawing, the installation process will roll on. After the step by step inspection, installing and commissioning, you will be ready to use the panels for your house electricity purposes.

There are also several reasons for which you should select Abundant Solar as the consulting partner. First of all, it is an A+ rated organization authorized by BBB. Next, it offers no money down options to avail low-interest financing plan from lenders. Third, you will get insured protection for the panels as it is a licensed organization and also carries different policies from various electrical contractors. It is also certified by the NABCEP, Austin Energy, etc. and thus there is no doubt about their performance. Next, as the company runs a locally owned business, you can reach out to them very easily. Now last but not the least, it merely takes 45 to 60 days depending upon the project for the complete installation which is an important point regarding customer perspective.