Archive for the ‘Home Improvement’ Category

Miami, Florida Storage Container Maintenance Guide

For some people, shipping containers are only meant to store things in it and transport goods but depending on what you are transporting it will require some kind of maintenance. Rust is the number one problem and if you don’t treat it properly it can get damaged faster and you might lose potential money-making depot. For example, when you are transporting food, they need to go through inspection in order to be clear for transport.

This is even more important for people that are looking to make a house of them. It will require maintenance like every other house. In this case, it is very important what type you choose and the size. The lifespan will depend on the material and how much you take care of it. Look to cut down the costs on shipping by buying a used one so you will be able to invest in it later.

Get more information here:

Examine the Container

A great thing about them is that they don’t have many moving parts all of them are in the door assemblies. This means that that area will probably be damaged and will require the most maintenance. Depending on what you will use it for, make sure it is in working condition. After cleaning them you can lubricate them from time to time. If you will use it to make a home, there’s a high chance that you won’t need to open the door. It will be cut off and used for a different purpose.

After inspecting the door, check all other areas for rust. Make sure you clean the dirt first because it will be easier to check where rust formed. Because it is made to be sealed, check the interior also for the same issues. It can get damaged by the load that was in it or just by rust over time. It would be a smart idea to clean it thoroughly if the food was transported inside.

What Causes Containers to Rust?

The material used for manufacturing them will determine will it rust or how fast it will rust. There are many varieties of steel that can be used for manufacturing them. Most people know it as Weathering steel which is cor-ten steel used to make standard 20 or 40-foot containers. Even if it was developed in the US to be resistant to corrosion and have tensile strength, most of them are made in China. They haven’t achieved the resistance they wanted but it is quite resistant in the right environment.

If yours was used for overseas shipping, it was exposed to air that is full of salt and probably exposed to water. It’s been through a lot of wet and dry cycles which can be good but when traveling overseas many other factors are impacting the material quality. This speeds up the oxidation reaction which causes rust. Every container will have a protective coating so if it gets damaged, you can expect the rust to form faster. Always inspect it first before making the purchase.

How to Prevent Rush?

It’s much better to prevent rush from happening because it will save your money a lot. You won’t be able to get involved in every way that will help prevent it because it starts from pre-construction and later comes maintenance and in the end, it will depend on the location. By doing regular inspections you can prevent a lot of damage from happening.

When you check the exterior, see if something has fallen on it and made damage to the protective coating. If it was raining these days and water is still standing on it, make sure you clean the area because water will promote corrosion. Some containers are repaired and there can still be some dents that will collect water so make sure there are no dents.

If you plan to make a home out of it, you can use spray that will prevent corrosion even if you will apply insulation over it. This will make sure that your walls are protected from any threats. When you used it for home storage, it won’t cost you a lot to use a protective spray to make sure it lasts longer.

Rust Treatment

Buying a used one will, in many situations, mean that it will have some damage to it. Most commonly the damage will be rust and you will need to find a way to treat it. You will need to remove it to prevent further damage and keep it protected as well. The most efficient way is to sandblast the rust and then paint and seal the container but it is the most expensive choice. It has to be painted and sealed because you will remove the rust by cleaning it to the bare metal.

A less expensive way is to use sandpaper and wire brush to remove the rust patches. The sandpaper should be used for finishing touches so start with the wire brush. Another tip is to use vinegar after you cleaned it and live it to dry. Use directly to metal or DTM paint for repainting. If you own a 20-foot container, it requires 4 gallons of paint to cover the whole thing.Click here to read more.

The Right Choice

Making the right choice can make it much easier when it comes to maintenance. Think about the details when you are looking for a used one. You might try to ship something but if it doesn’t work out, you will need an alternative use for it. It’s becoming very popular to make houses of it so you need to think about the material that they are made of.

Look for small damages that may affect it more after a while. They won’t provide a small price without any reason. There will probably be something that you won’t see at a first glance. Ask details about the container like what was being transported and for how long. This will help you to get an idea of how much it was used.

How To Maintain Top-Notch Restaurant Cleanliness

Running a restaurant is hectic, but cleanliness is critical for a restaurant manager or owner. Top-notch eateries understand the importance of maintaining a clean environment for customer and business health.

Most restaurants cannot afford third-party cleaning services, so the staff and managers are responsible for tackling these tasks. It’s easy to get overrun in a busy restaurant, but with proper systems in place, you can keep staff, diners, and the health department happy.

Kitchen Exhaust Systems

Keeping the restaurant hood system clean is a critical step for safety and efficiency. The National Fire Prevention Association (NFPA) establishes the codes for industrial exhaust cleaning systems. Commercial vent hoods must be maintained by a certified provider. The restaurant hood cleaning Orlando FL offers solutions to protect systems from hazardous buildups.

Dining Area

Restaurant managers cannot account for industry trends, but they can control cleanliness. Make a good first impression in this area or it will be the last and only impression made with a customer.

Use a clean towel that has not been used in other restaurant areas like the restrooms or kitchens. Restaurant workers should thoroughly sanitize surfaces customers interact with such as tables, bars, and seats.

Kitchen Area                   

After each task, workers must sanitize utensils, surfaces, and equipment that food touches. Local and state government decides which cleaners and disinfectants restaurant staff should use to clean dishes.


Keep toilet paper, soap, and paper towels fully stocked. Hand dryers are more eco-friendly, hygienic, and help the floor remain paper towel-free. Scrub toilet seats, bowls, and the floor around the fixtures. Since customers and employees typically share restroom facilities, keeping this area clean discourages cross-contamination from food to utensils.

These are just some of the areas restaurant owners and staff should maintain. Prioritizing cleanliness is part of the foundation for a successful establishment, so set a good example to instill this value in your staff, and customers will notice the result.

Chemical and Non-Chemical Methods of Boiler Deaeration

Deaeration is one of the most important processes used to maintain the working condition of a boiler. Water fed into a boiler usually contains dissolved gases like carbon dioxide and oxygen which can corrode the materials that make up a boiler or steam plant over time. Oxygen can create oxides that rust a boiler and carbon dioxide can turn into corrosive carbonic acid. High temperatures which are a natural part of a boiler’s operation can also speed up corrosion. This can lead to costly replacements and lost production time. Deaeration is performed by either chemical or non-chemical processes, such as using deaerator pumps to remove potentially harmful gases.

Chemical Deaeration

The addition of certain chemicals to the boiler feed water transforms the unwanted dissolved gases into chemical formats that are harmless to the material of the boiler. These chemicals, which are sometimes called oxygen scavengers, are usually added after mechanical deaeration has been performed to fully neutralize the atoms. Some of the most preferred chemicals are sodium sulfite and hydrazine. It is important to know the volatility of the water treatment program used before choosing chemicals for deaeration. The pressure can have an impact on the chemicals used.

Non-Chemical Deaeration

Also called mechanical deaeration, this method takes out dissolved carbon dioxide and oxygen instead of altering the gases in the boiler feed water. The mechanical deaerator heats the feed water near to its boiling point, then sprays the hot water over several trays with perforations. Some types of mechanical deaerators are designed without trays but still function efficiently. As the steam moves in the deaerator from this action, the carbon dioxide and oxygen gases separate from the boiler feed water. They exit the deaerator by way of a vent at the top of the tank. The de-gassed water remains in the deaerator to be fed to the boiler, now free of corrosive gases.

Managing Severe Roof Damage


There are a number of factors that can lead to a damaged roof, and in a city like Denver that experiences all four seasons, problems can become even more likely. Roof problems transition from troublesome to emergency status when a roof is damaged to the point of exposing your home to the elements — most often, this is due to an extreme weather event or a fire. When you are facing severe roof damage, there may be more options to manage the difficulty than you think. Below are some tips for people seeking emergency roof repairs Denver CO

Safety First

If your home is significantly structurally damaged, it is best to consult an expert to know if your home is safe to enter. If damage occurs during a weather event like strong winds or snow, causing a tree to fall onto your home, make sure the extreme weather has passed and confirm that it is safe to exit your home as well. If and when experts are called to your home to asses the damage, these same safety precautions will be implemented. Most professionals would say that the first step is to try and secure the home against the next most vicious element: water.  

Cover Your Bases

In the event of emergency-level damages, a temporary cover will most likely be placed over the part of your home where the trouble occurred. Then, the journey towards repairs begins. While no one wants to believe that their roof can be critically damaged, it is best to have a plan for this worst case scenario. If you have homeowners insurance, that is a fantastic start. 

While it may be tempting, don’t try to fix the roof yourself, even for a temporary fix. The risk involved may lead to further damage or personal injury. Once these initial steps are taken, more permanent solutions can (and will) be found. For now, know that you have your roof over your head. Now it’s just important to know how you plan to keep it there. 

What To Consider Before Installing a Fence

A properly thought out fence can accomplish the property owner’s objectives in erecting the fence, regardless of whether the goals are to provide privacy, increase security, establish boundaries, or something else. Beyond the objectives for building the fence, however, aesthetics usually also come into play.

If you are considering fence installation columbus ohio, there are certain factors to keep in mind before installing a fence. Doing so will go a long way toward making sure that the fence is well planned and achieves the goals that you have for the finished project.

Fence Design

When designing a fence, the underlying purpose usually has a significant impact on the ultimate look of the finished structure. Simply stated, the reason for the fence greatly influences what it will end up looking like. Every style of fencing, though, can be customized in multiple ways to achieve the design look you are going for while simultaneously ensuring that the fence also achieves its purpose in being constructed in the first place. Thus, no matter what the purpose of the fence is and no matter what type of material the fence is built from, there are design modifications available to suit the aesthetic you prefer.

Fencing Material

The purpose of the fence oftentimes drives the material that it is built from. Modern fences are made from wood, vinyl, aluminum chain link, and other metals. Obviously, each material has its own advantages and disadvantages, along with unique maintenance requirements.

Alert the Neighbors

It is almost always a good idea to talk to any neighboring property owners whose parcels abut yours prior to constructing a new fence. Although it may not be legally required, the neighbors will undoubtedly appreciate the prior notice as the new fencing could potentially have some effect, even if minimal in nature, on the adjoining tracts.

It is helpful to consider these basic factors before embarking on a fence installation. A little advance thought and planning should help lead to a finished fence that meets all of your wishes.